Features

Battery Start Feature

The Battery Start feature allows you to turn on the UPS when utility power is not available. The battery-start range is up to about 40% of nominal input; otherwise, the UPS displays an input voltage fault and the alarm beeps.

RJ-11 or RJ-45 Surge Protectors

The RJ-11 or RJ-45 surge protectors are located on the side panel and are labeled IN and OUT. This feature accommodates an RJ-11 connector that provides protection for modems, fax machines, or other telecommunications equipment. As with most modem equipment, it is not advisable to use this jack in digital PBX (Private Branch Exchange) environments.

Low voltage models can also accommodate a single RJ-45 (10BaseT) network connector.

NOTE DO NOT connect any network equipment to the 230V models; only telephone or fax/modem protection is available for 230V models.

1.Connect the input connector of the equipment you are protecting to the jack labeled IN.

2.Connect the output connector to the jack labeled OUT.

Powerware3110 User’s Guide S Rev B www.powerware.com

7

®