Powerware 300 VA, 3110, 700 VA FEATURES, Communication Options, USB Port

C H A P T E R 2

FEATURES

This section covers:

SUsing the USB or DB-9 communication port

SStarting the UPS on battery

Communication Options

The UPS is equipped with a USB and a DB-9 communication port. Either the USB port or the DB-9 communication port may be used to monitor the UPS; however, they cannot operate simultaneously.

USB Port

The UPS can communicate with a USB-compliant computer using

LanSafe Power Management Software (v4.15 or higher).

To establish communication between the UPS and a computer:

1.Connect the USB cable to the USB port on the UPS rear panel.

Connect the other end of the USB cable to the USB port on your computer.

2.Install the LanSafe software and USB drivers according to the instructions provided with the Powerware Software Suite CD.

Powerware® 3110 User’s Guide S Rev B www.powerware.com