Precision Power DCX 300.2, DCX 500.2 manual The LEDs provide the following indications

AMPLIFIER STATUS LEDS

3 4

SHORT PROTECT THERMAL PROTECT

POWER CLIP OUT

1 2

The LEDs provide the following indications:

1.Power - This LED illuminates RED when the amplifier power is turned on with the remote input (output muted). After a short time delay this LED will turn GREEN (amplifier ready).

2.Clip Output - This LED illuminates RED on the peaks of the output signal when the peaks are too high. This clipping causes audible distortion in the speakers.

3.Short - This LED illuminates RED on a short condition. The amplifier will turn off and try to turn back on.

4.Thermal - This LED illuminates RED on a thermal condition. The amplifier will turn off and turn back on in a minute or so.

Note: Read the AP-IV Protection Circuit section for additional information regarding Short and Thermal protection.

6