16 | Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 |
Required Tools
#2 Phillips screwdriver
Rubber mallet
SAE standard hex wrench set
SAE standard socket set
Two
Wire cutter
Performing the Assembly
DANGER Do not attempt to connect electrical power until all assembly procedures are complete and the console
is properly installed.
As you assemble the EFX, make sure to construct the cable assembly as directed so that the necessary connections are accessible when you add the console.
To begin assembly:
1.Remove the lift cover and set it aside.
Important: Grease on the lift screw can stain clothing. Be careful not to get grease on your clothing as you remove the lift cover. Do not remove the grease from the lift screw, because it is required for proper operation.
Figure 2: Lift cover removal
2.Thread the cable through the left upright support. Tape it to the top of the upright support to secure it temporarily.
