Self-Powered Features, Rate of Motion | Precor EFX 885, EFX 835

Chapter 4

Self-Powered Features

Important: This chapter of the manual describes Precor fitness equipment that can operate without being connected to AC power. This includes units equipped with P40 or P20 consoles. However, P80 consoles must be connected to AC power through their power supplies to operate. For this reason, this chapter does not apply to units equipped with P80 consoles.

On self-powered equipment, the system initializes and displays the Welcome screen when a user starts exercising. A minimum rate of motion must be maintained for the banner to appear, as shown in the following table. When a person meets the requirements, the power that is generated allows the equipment to function properly.

Table 3. Minimum requirements for operation

Equipment	Rate of Motion

AMT	56 strides per minute (SPM)

EFX	40 strides per minute (SPM)

Climber	30 steps per minute

Bike	20 revolutions per minute (RPM)

Informational displays appear when the battery is low or when the rate of motion drops below the minimum requirements. The display explains what to do to retain power. If the messages are ignored, the equipment begins shutdown procedures to maintain the charge of the battery. Refer to Informational Displays Prior to Shutdown.

An optional power adapter can be purchased and provides sustained power to the equipment. If you plan to change the club settings, the power adapter is highly recommended. To purchase the optional power adapter, check with your dealer. Refer to Obtaining Service.

Image 45

Precor EFX 885, EFX 835 warranty Self-Powered Features, Minimum requirements for operation, Rate of Motion

Contents

Assembling and Maintaining Elliptical Fitness Crosstrainers Page Page Edition Information Trademark NoteIntellectual Property Notice Safety Precautions Important Safety InstructionsPage Educating Users Hazardous Materials and Proper Disposal Product Recycling and DisposalRegulatory Notices for the Rfid Module Federal Communications Commission, Part Radio Frequency Interference RFIIndustry Canada Void the user’s authority to operate the equipment Regulatory Notices for Cardiovascular Exercise Equipment Safety Approvals for Cardiovascular EquipmentEuropean Applications Cardiovascular Type Equipment User’s authority to operate the equipment IEC-320 C13 and C14 plugs Obtaining Service Obtaining Updated Documentation Table of Contents Commercial Cardiovascular Equipment Limited Warranty Assembling the EFX To prepare the EFX for assembly Installation Requirements Hardware Kit not to scaleFasteners Buttonhead screws To begin assembly Performing the AssemblyIs properly installed Required Tools Repeat steps 2 through 4 to attach the right upright support EFX cable path Cable connection points inside EFX base To mount the center column support on the frame Lift cover replacement Center column support attachment To tighten the fasteners properly Tighten the back fasteners on the upright supports To attach the upper body handlebars To attach the water bottle holder Fully tighten the fasteners using a ⁹₁₆-inch box-end wrench Upright support cover attachment right-hand cover shown To attach the upright support covers and pivot arm caps Attach the pivot arm caps and seat them with a rubber mallet To level the unit Leveling the EFX Breaking in the Equipment Threading the Cable Assembly P80 Installing the Console Removing the access cover from the P80 console To thread the cable assembly Location Connecting Cables P80 Connecting the Television Cable Cable Connector Type Circuit LocationTo connect the television cable Connecting the television cable Connecting the Ethernet and Base Unit Data Cables Connecting the Power Cable Connecting the Heart Rate Sensor Cable Completing the Console Installation P80 Threading the Cable Assembly P30To complete the installation Console positioning on base unit Connecting Cables P30 Completing the Console Installation P30 Verifying That the Heart Rate Display Is OperationalTo verify that the heart rate display is operational Daily Cleaning Maintenance Daily Inspection Monthly Maintenance Weekly Maintenance Storing the Chest Strap Moving the EquipmentLong-Term Storage Self-Powered Features Minimum requirements for operationRate of Motion Informational Displays Prior to Shutdown Symptoms of a Low Battery Optional Power Adapter Kit Using the Optional Power Adapter Replacing the Battery Commercial Cardiovascular Equipment Limited Warranty Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental Damages Commercial Cardiovascular Equipment Limited Warranty Page Page Precor Incorporated Operating and Maintaining the P30 Console Page Page Edition Information Important Safety Instructions Operating and Maintaining the P30 Console  Do not lean on or pull on the console at any time Hazardous Materials and Proper Disposal Regulatory Notices for Cardiovascular Exercise Equipment 240 V Equipment Designated for U.S. Markets 240-volt, 20-amp power plug 120-volt, 20-amp power plug Operating and Maintaining the P30 Console 240 V Equipment Designated Operating and Maintaining the P30 Console Activating the Console for Self-Powered Equipment Activating the Console for Self-Powered EquipmentGetting Started Optional Use of the Power Adapter Identifying Parts of the Console Number Part Name Details Watts Number Part Name Details System Settings Setting Up the Console To view the Club Parameters settings Navigational keys for the system setting modes Key5 1 5 6 Safety Code Treadmill only Setting Club Parameter ValuesSelect Language All Equipment Set Units All Equipment Set Max Workout Time All Equipment Set Max Pause Time All EquipmentSet Cool Down Time All Equipment Value Range on or OFF Creating a Custom WorkoutTo create a custom program Custom Program keys Equipment Key Name Description Set Speed Limit Treadmill only Set Incline Limit Treadmill onlyHidden Programs Treadmill only Set Resistance Range Bike only Set Crossramp Auto Level EFX Dual onlyValue Range 0 to Viewing the Informational Displays To view the System settingsInformational Displays values Value Information provided Product Value Information provided Event Log Event Description of Event Number User ID Entry with Csafe Equipment Csafe access keys Keys Function Operating and Maintaining the P30 Console Introducing Users to the P30 Console Using the Touch Heart Rate Feature Heart rate target zones To use a chest strap transmitter Using a Chest Strap TransmitterInterfere with pacemakers or other Heart rate strap Restart switch Using the Treadmill Safety Clip Attaching the safety clip Treadmill Auto Stop Automatic Stop Function WORKOUT, Press QUICKSTART, or Enter to Begin Starting a Workout Setting Options Starting a Preset Programmed WorkoutTo choose a language setting before you begin exercising To choose a workout goal before you begin exercising Setting Options after You Begin a Workout To enter your Age and Weight during a workoutTo choose a unit of measure before you begin exercising Pausing and Resuming an Exercise Session Paused Externally Powered EquipmentPending Shutdown Self-Powered Equipment Ending a Session Operating and Maintaining the P30 Console Manual ProgramsHeart Rate Interval Weight Loss VarietyPerformance To remove dust and dirt from the console Cleaning the Console and Display 20031 142nd Avenue NE January Box Woodinville, WA USA