
TeamPoS 3000 XL and XL2 | General Operations |
6.1.3Powering ON
1.Make sure all peripherals are securely connected to the control unit.
2.Make sure the power cord is plugged into the power source.
3.Lift the plastic switch cover at the front of the control unit.
4.Press the ON switch.
5.Confirm the power/battery status LED is ON and not blinking, indicating the successful completion of
Any hardware errors detected on power up will appear on the operator display (CRT or LCD). Note that the Model VF60
D900000145 | Issue 3 |