Fujitsu 3000 XL manual Keycaps installed

TeamPoS 3000 XL and XL2 Installation

6.Insert connector cable into the connector in the Keypad/MSR. The cable only fits one way and will snap into place.

7.Reattach rear cover of keypad/MSR. Align the top and outer edges first then ease the tabs at the lower edge inside the shell until they snap into the notches.

8.For keypad/MSR installation only, snap the keycaps onto the keys.

Keycaps installed

9.Be sure the A-B USB cable is connected to the back of the LCD to power the keypad/MSR. The MSR and MSR/Keypad have separate USB interfaces. AN A-BUSB cable is required to connect to the controller.

D900000145 Issue 3 5-66