TeamPoS 3000 XL and XL2 | Maintenance |
7.4Replacing the Hard Disk Drives
Caution: Be sure to observe all ESD precautions and power off procedures.
1.Remove the front panel (See Section 5.1.1).
2.Remove existing hard drive from motherboard by pressing down on the metal tab (below the hard drive bracket near the left side) and pulling on the transparent pull tab.
3.If the new drive does not come with the bracket, remove the 4 screws for disk drive and then install the new drive.
4.While holding down the metal tab, slide the new hard disk drive or hard drive filler into the bay making sure that the runners align with the guides.
Issue 3 | D900000145 |
