TeamPoS 3000 XL and XL2 | Installation |
5.14.1.Single Stacked LCD Stand
Lower Hinge | Top Hinge |
Cover | Cover |
Hinge Cap | Cable Access |
| Cover |
Single Stacked LCD Stand | Lower Hinge | Top Hinge |
| ||
| Cover | Cover |
1.Remove only the hinge cap and cable access cover from the stand; leave the top and bottom hinge cover in place. Some photos in this section show the top and bottom hinge cover and cover removed in order to more clearly show the cable route; however, assembly is easier if the bottom hinge cover and top hinge cover are left in place.
2.Remove the cable access cover by pressing from
the underside. The cable access cover should pop out easily.
3.To remove the hinge cap, grasp it firmly as shown in the photo and pull back using your thumbs.
D900000145 | Issue 3 |
