TeamPoS 3000 XL and XL2 | Installation |
5.8.Installing the Partial Backup Battery
Caution: Be sure to observe all ESD precautions and power off procedures.
The partial backup battery is located on the front of the TeamPoS 3000XL and XL2 on the left.
1.Remove the rear panel (See Section 5.1.2).
2.Disconnect the AC power cord from the controller.
3.Remove the front panel (See Section 5.1), and the yellow LED should be off. (See Section 1.2).
4.Remove the protective front metal covering as shown.
Issue 3 | D900000145 |
