TeamPoS 3000 XL and XL2 | Dimensions |
Chapter 3 - DIMENSIONS
This section shows the dimensions of the TeamPoS 3000 XL and XL2 control units and peripherals. For 3rd party peripherals not shown, refer to the appropriate 3rd party manufacture documentation. Note: All dimensions are expressed as mm and inches.
The TeamPoS 3000 XL and XL2 control unit is available in two sizes, compact and standard, and in two colors, black and white. Comparable black and white units are the identical size.
The standard unit can be stacked where peripherals (printer, keyboard, operator display and customer display) are stacked on top of the control unit. This requires brackets to be installed on the control unit that restrain movement of the peripherals. The cash drawer, if stacked, is located under the control unit. In this case, brackets are installed on top of the cash drawer to restrain the controller.
3.1Standard TeamPoS 3000 XL and XL2 12” LCD Stacked Configuration Dimensions
560
22 ¼”
490 |
| ||
19” | 450 | ||
17 ¾” | |||
|
| ||
503 |
|
| |
19 3/4” to end of printer |
|
| |
|
|
| |
Customer Display
adjusts from 476 to 592
18 ¾” to 23 5/16”
540
21 7/16”
Note: | Dimensions taken with monitor facing straight forward. The 12” LCD |
| overhangs the right edge of the controller. In this position the widest point is |
| 21 7/16”. The customer display is mounted on a stacked adjustable pole which |
| can extend up to 23 5/16”. The printer overhangs the rear edge by 3/4 inch. |
| The longest dimension front to back is 19 3/4”. |
D900000145 | Issue 3 |
