![](/images/new-backgrounds/1306695/30669599x1.webp)
TeamPoS 3000 XL and XL2 | Installation |
3.To reinstall the rear panel, insert the metal tabs into the sides of the chassis and slide the locking tabs down.
5.2Removing the motherboard assembly
Caution: Be sure to observe all ESD precautions and power off procedures.
1.Remove the back panel (See Section 5.1.2).
2.Disconnect the AC power cord from the controller.
3.Remove the front panel (See Section 5.1.1). The Yellow LED should be off. (See Section 1.2).
4.Remove hard disk drive shield by pushing in on the right side and pulling outward.
D900000145 | Issue 3 |