Fujitsu 3000 XL manual Combo Board with COM Board XL Motherboard only

TeamPoS 3000 XL and XL2 Maintenance

7.9.4 Combo Board with COM Board (XL Motherboard only)

1.Remove the rear panel (See Section 5.1.2).

2.Disconnect the power cord from the back of the controller.

3.Remove the front Panel (See Section 5.1.1), and the yellow LED light will be off (See Section 1.2).

4.Unseat the motherboard.

5.Remove the backplane assembly (See Section 7.8).

6.Remove the old Combo board by removing the black pin and retainer clip at the center of the Combo board and removing the screws (retain screws, black pin and clip).

7.Remove the old COM board by removing the two screws

7-44 Issue 3 D900000145