Cisco Systems 3000 manual Camera Target assembly used for camera focus and alignment

Chapter 1 Overview

Chapter Organization

•Each element is described using one or more illustrations. The elements are:

–Camera assembly - attaches to the center Display structure

–Microphone assembly - attach to the three table segments

–Table Leg Wiring assembly - wired for power and network connectivity

–Projector assembly - attaches to the underside of the center table segment

–Privacy Panel assembly - attach to the table segments

–Codec assembly - attach to each Display structure

–Speaker assembly - attach to the underside of the Display shelf

–Projector Screen assembly - attaches to the underside of the Display shelf

–Cisco IP Phone 7975G

–Camera Target assembly - used for camera focus and alignment

Chapter 8, “Routing Power and Signal Cables”

•A series of illustrations are used to describe the routing and connection of all power and signal cables.

•Illustrations show you the routing path to take for all cables.

•Illustrations showing cables terminating in a Codec include a close-up of the Codec.

•A pointer to the first-time setup information.

Chapter 10, “Use & Care Guide”

•This chapter provides information on maintaining several elements of the Cisco TelePresence System 3200, including the tabletop and plasma displays.

Chapter 11, “Field-Replaceable Unit Guide”

•This chapter describes removal and replacement processes for various elements of the Cisco TelePresence System 3200.

Appendix A: Parts List Sorted by Carton

•This appendix lists all parts included in the individual chapter parts lists, and sorts the list by carton.

Appendix B: Region- and Country-Specific Equipment

•This appendix lists the part numbers for all region- and country-specific equipment, including table leg wiring and power cords.

Cisco TelePresence System 3000

1-2 OL-14521-01