Chapter 1 Overview

Tools and Equipment List

Figure 1-2 Cable Connection Labeling System

157702

Tools and Equipment List

To assemble the Cisco TelePresence 3000, you need the following tools and equipment:

Uncrating and Unpacking:

•Claw hammer or small pry bar

•Large Phillips screwdriver

•Tin snips*

•Pallet jack or hand cart (for moving component boxes to installation site)*

•Safety gloves*

•Safety glasses*

•Box cutters*

Cisco TelePresence System 3200 Structure, Accessory, and Adjustment Assembly:

•Power screwdriver with 3, 4, 5, and 6 mm (standard or round) Allen bits, or standard 3, 4, 5, and 6 mm Allen wrenches

Tip A round-head Allen bit can work at an angle instead of just straight out, a helpful feature in tight spots.

•Manual screwdrivers, #2 and #4 Phillips and flathead types

•Metric wrenches, 10 to 15 mm

•9/64-inch Allen wrench (included with speakers)

•Tape measure

•Level

•Masking tape*

•Tie wraps*

•Knee pads or kneeling cushion*

•Laptop computer attached to network (for troubleshooting or reference)*

•Hand vacuum or facilities vacuum*

•Stepladder*

•Mechanical lift (optional, for hanging display screens)

*Recommended for best results

Cisco TelePresence System 3000

 

OL-14521-01

1-5

 

 

 

Page 15
Image 15
Cisco Systems 3000 manual Tools and Equipment List, Uncrating and Unpacking