1-4
Cisco TelePresence System 3000
OL-14521-01
Chapter 1 Overview
Conventions and Terminology
c. Install the I/O Modules for the table leg power and Ethernet connections and connect the Ethernet
cables. See Step 3 and Step 4 in Chapter 7, “Assembling the Remaini ng Cisco TelePresence
Elements” to install the I/O modules and cables and Step 5 in Chapter 8, “Routing Power and Signal
Cables” to connect the Ethernet cables.
Step 6 Install the codecs and connect the signal cables. See Step 12 through Step 14 in Chapter 7, “Assembling
the Remaining Cisco TelePresence Elements” to install the codecs and Step 10 and Step 12 in Chapter 8,
“Routing Power and Signal Cables” to connect the signal cables between the codecs and pl asma displays.
Step 7 If you ordered a presentation codec, install this codec. Refer to the Cisco TelePresence Hardware
Options and Upgrade Guide for more information.
Step 8 Install and connect the camera assembly. See Step 1 in Chapter 7, “Assembling the Remaining
Cisco TelePresence Elements” to install the camera assembly and Step 11 in Chapter 8, “Routing Power
and Signal Cables” to connect the camera cables.
Step 9 Install and connect the PDUs. See Step 1 through Step 3 in Chapter 8, “Routing Power and Signal
Cables” to install the PDUs and Step 4 in Chapter 8, “Routing Power and Signal Cables” to connect the
cables.
Step 10 Connect the projector to the projector bracket, and connect the projector and bracket to the table
assembly. See Step 5 and Step 6 in Chapter 7, “Assembling the Remaining Cisco TelePresence
Elements” to connect the projector to the table assembly and Step 4 in Chapter 8, “Routing Power and
Signal Cables” to connect the cables.
Step 11 Place the Cisco Unified IP Phone on the table and connect the phone cable. See Step 5 in Chapter 8,
“Routing Power and Signal Cables” to connect the cable.
Step 12 Install the privacy panels. See Step 9 through Step 11 in Chapter 7, “Assembling the Remaining
Cisco TelePresence Elements.”
Step 13 Install the speaker boards and speakers. See Step 16 through Step 18 in Chapter 7, “Assembling the
Remaining Cisco TelePresence Elements.”
Step 14 Install the projector screen. Refer to the projector screen installation guide that is packaged with the
assembly.
Step 15 Connect the power cables for the codecs, lighting and table leg power connections by completing Step 4
in Chapter 8, “Routing Power and Signal Cables.”
Step 16 Assemble the camera targets by completing Step 21 in Chapter 7, “Assembling the Remaining
Cisco TelePresence Elements.”
Step 17 Perform first-time setup using the instructions in Chapter 9, “First-Time Setup.”
Conventions and Terminology • The directions left and right in this guide are synonymous with participant’s left and participant’s
right. They refer to the assembly as you face the Plasma displays.
• Cable connections to the Codecs are labeled with a color-coded symbol system.
–
A single dot on a green background indicates a center element.
–
Two dots on a white background indicate a left element.
–
Three dots on a red background indicate a right element.