Cisco Systems 3000 manual Accessory Cabinet

Chapter 5 Building the Display Shelf Assembly

Building the Display Shelf Assembly, Product ID CTS3K-FUR-MAPLE

Step 5 Attach the screen supports to the accessory cabinets and position, but do not attach, the cabinets to the left and right attachment brackets

These screen supports are only required if you use a Type 1 projector screen, part number 800-28681-xx. If your installation uses the projector screen with a product ID of CTS3K-SCREEN and a part number of 74-5416-xx, do not install these brackets.

Figure 5-6 Accessory Cabinet

12

2

1

3

4

4

3

12

204159

Note One wall of the left Accessory cabinet was removed from this illustration for clarity.

Note Before you attach the Accessory cabinets to the brackets, use them as supports while assembling the table segments in Chapter 6, “Building the Table Assembly.”

Cisco TelePresence System 3000

OL-14521-01 5-9