Cisco Systems 3000 manual Other Devices

Chapter 9 First-Time Setup

Setting Up CTS Components

Note The Cisco TelePresence System can display information from multiple input devices during a meeting;

if multiple input devices are sending information, the projector displays the input from the last presentation device sending information. If an input device image is not being seen on the projector screen, try the following: for VGA devices, unplug the device from the VGA cable, wait 5 seconds, and then plug the device back in; for document cameras: turn the camera off, wait 5 seconds, and then restart the device.

Other Devices

Use Other Devices to check the Auxiliary Control Unit, which controls the individual light units surrounding the displays in CTS conference rooms and enables the CTS to get more complete projector status information and to restores projector defaults.

•Click Other Devices on the Hardware Setup window.

•Click the Start radio button to access the Auxiliary Control Unit to begin testing. To end the test, click Stop.

–Individual light units correspond to the five port numbers of the Auxiliary Control Unit. Click the appropriate box to select a specific port number; Click Select All to select all ports (and all light units) or Select None.

–Click the Refresh On/Off Status button to update the on/off status of each port.

–Click the Turn Selected Lights On/Off to test the selected light unit(s).

–Click the Reset Auxiliary Control Unit to power cycle the Auxiliary Control Unit.

	Cisco TelePresence System 3000
9-22	OL-14521-01