Cisco Systems 3000 manual Left Table segment

Chapter 6 Building the Table Assembly

Building the Table Assembly, Product ID CTS3K-M

Step 10 Attach the left Table segment.

a.The draw bolts have two halves that screw into a center piece.

b.While a draw bolt is being tightened, hold the table edges together to avoid damage to the draw bolt or the table segment.

c.Tighten the draw bolts so the two table segments are connected snugly.

d.While one person is tightening the draw bolts from below, it is important for the support person to maintain the alignment of the table segment edges.

Note The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top.

Figure 23 Left Table segment

7

6

12

10

204142

	Cisco TelePresence System 3000
OL-14521-01		6-27