Cisco Systems 3000 manual Camera Assembly

Chapter 7 Assembling the Remaining Cisco TelePresence Elements

Parts List

Step 1 Place the assembly over the center display, then attach the Camera Assembly to the Camera Assembly bracket.

For clarity, the display has been removed from the illustration in Figure 7-1.

Note There are two foam pads on inside of the camera assembly. Make sure that the foam pad on the top of the camera assembly touches the top of the display, and the foam pad on the front of the assembly touches the front of the display. To make adjustments, loosen the four screws on the top of the camera assembly and move the assembly forward or back as required; then, retighten the four screws.

Figure 7-1 Camera Assembly

8

8

201164

Cisco TelePresence System 3000

OL-14521-01 7-5