Cisco Systems 3000 manual Maintaining the Tabletop, Cleaning the Plasma displays, 10-1

C H A P T E R 10

Use & Care Guide

Revised: October 31, 2008, OL-14521-01

Maintaining the Tabletop

Caution Waxing or rubbing the surface with any type of abrasive is not recommended.

•For general daily care - use a dampened cloth with clean water.

•To remove dirt - use a mild soap and water solution. Wipe off with clean water afterward to remove the soap.

•To remove ink marks - rub the stained area with a pencil eraser.

•To polish the tabletop - use lemon oil.

Note Lemon oil is not recommended for daily use.

Cleaning the Plasma displays

Per industry-standard best practice recommendations for cleaning plasma displays:

The plasma displays require special consideration when cleaning. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

Cleaning the Camera lens

Caution Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry microfiber cloth. After cleaning, you will need to realign the camera.

	Cisco TelePresence System 3000
OL-14521-01		10-1