Chapter 3 Mounting and Leveling the Plasma Displays

Purpose of Leveling the Plasma displays

Leveling Goals

Leveling the Display shelves and the Plasma displays, and aligning the seams of the Display shelves with the edges of the Plasma displays insures that images displayed from the remote conference room match the local conference room configuration.

The leveling goals illustrated in Figure 3-4through Figure 3-8show how to use the leveling alignment points in Figure 3-3. You may need to perform any or all of the illustrated goals several times while aligning and leveling the Plasma displays.

Step 4 Use the four Leveling feet on each Display structure to level the Display shelves along the X and Y axes. Leveling the Display shelves insures the Display structures are level. The Display structures should be level before attempting to level the Plasma displays.

Figure 3-4 Level the Display shelves along the X and Y axes

201114

Cisco TelePresence System 3000

 

OL-14521-01

3-5

 

 

 

Page 31
Image 31
Cisco Systems 3000 manual Leveling Goals, Level the Display shelves along the X and Y axes