Cisco Systems 3000 manual Cisco TelePresence System

Chapter 6 Building the Table Assembly

Building the Table Assembly, Product ID CTS3K-M

Step 6 Attach the right Table segment.

a.Make sure you tighten the draw bolt evenly on both sides.

b.While a draw bolt is being tightened, hold the table edges together to avoid damage to the draw bolt or the table segment.

c.Tighten the draw bolt so the two table segments are connected snugly.

d.While one person is tightening the draw bolt from below, it is important for the support person to maintain the alignment of the table segment edges.

Note The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top.

Figure 19 Right Table segment

54

12

	9
30	10
	204138
	Cisco TelePresence System 3000
OL-14521-01	6-23