Cisco Systems 3000 manual Microphone Assembly

Chapter 6 Building the Table Assembly

Building the Table Assembly, Product ID CTS3K-M

Step 13 Attach one microphone to each table segment. There are three microphones for the table.

The center microphone cable for the table must be seated in the cable channel on the underside of the center table segment in order to properly install the projector mounting bracket. You can use tape to secure it in place.

Note Steps for routing the microphone cables are in Chapter 8, “Routing Power and Signal Cables.”.

Tip Label each microphone cable where it exits from the table. You attach the microphones in Chapter 8, “Routing Power and Signal Cables.” Depending on your setup, you either connect the microphones to the codec or to the codec and audio/video extension unit.

Figure 26 Microphone Assembly

26

28 27

204177

	Cisco TelePresence System 3000
6-30	OL-14521-01