Cisco Systems 3000 manual Left Table segment

Chapter 6 Building the Table Assembly

Building the Table Assembly, Product ID CTS3K-FUR-MAPLE

Step 8 Attach the left Table segment.

a.Cam Lock rods have two adjustable halves that screw into a center piece. Make sure you screw the two halves of the Cam Lock rod equally into the center piece, so both halves are of equal length when inserted into the Cam Lock in each Table segment.

b.While a cam lock coupling is being tightened, hold the table edges together to avoid damage to the cam lock or the table segment.

c.Use an Allen wrench to tighten the cam lock coupling so the two table segments are connected snugly.

d.While one person is tightening the cam lock couplings from below, it is important for the support person to maintain the alignment of the table segment edges.

Figure 8 Left Table segment

7

6

15

15

9 9

10

201159

10 13 17

	Cisco TelePresence System 3000
6-12	OL-14521-01