TeamPoS 3000 XL and XL2 | Installation |
11.Connect the wide ribbon cable on the COM board to the ribbon socket on the Combo board
Ribbon Cable for
Com Board
Connects to
Combo Board
12.Flip combo board and attach it to the top opening of the chassis of the backplane assembly by sliding it down into the notches on the chassis. Secure board with the 2 mounting screws.
Mounting
Screws
13.Make sure that the cables do not interfere with the motherboard. Bend and fold the ribbon cables as needed to clear the motherboard.
D900000145 | Issue 3 |
