![](/images/new-backgrounds/1306695/306695411x1.webp)
TeamPos 3000 XL and XL2 | Troubleshooting |
8.12Operation errors of other peripheral devices
No | Check item | Judgment | Action | |||
1 | Is the cable connected correctly? | Y | Go to No. 2. | |||
N | Connect the cable correctly. | |||||
|
|
| ||||
2 | Does WINCLD operate properly with | Y | Check the program. | |||
this peripheral? | N | Go to No. 3. | ||||
| ||||||
3 | Can the system be activated after | Y | End. | |||
replacing the associated I/O board? | N | Go to No. 4. | ||||
| ||||||
4 | Can the system be activated after | Y | End. | |||
replacing the motherboard? | N | Go to No. 5. | ||||
| ||||||
5 | Can the system be activated after | Y | End | |||
replacing the power supply? | N | Change the controller. | ||||
| ||||||
|
|
|
| |||
|
| Caution: Before replacing any boards, unplug the power cable and make |
| |||
|
| sure the motherboard standby power LED light is out. |
| |||
|
|
|
|
|
|
D900000145 | Issue 3 |