TeamPoS 3000 XL and XL2 | Maintenance |
7.11Replacing the Power Supply
1.Remove the back panel (See Section 5.1.2).
2.Disconnect the power cable from the controller.
3.Remove the front panel (See Section 5.1.1). The yellow LED light should be off (See Section 1.2).
4.Unseat the motherboard.
5.Remove the backplane assembly (See Section 7.8).
6.Unseat any installed I/O boards. It is not necessary to disconnect the cables, just remove from the chassis to allow access to one of the mounting screws and the power supply cables.
7.Remove the 3 mounting screws. Retain the screws.
Screw #1 | Screw #2 | Screw #3 |
Viewed from front of | Viewed from rear of Power | Viewed from side of |
Power Supply | Supply | Power Supply |
D900000145 | Issue 3 |
