Fujitsu 3000 XL manual Panel Removal/Installation Process, Front Panel

TeamPoS 3000 XL and XL2 Installation

CHAPTER 5 INSTALLATION

Caution: Confirm that the external power source is 100-240 VAC before starting the operation. To prevent electric shock, confirm that the AC cable is removed from the AC outlet anytime the panels are removed. Be sure to observe all ESD precautions and power OFF procedures.

5.1Panel Removal/Installation Process

In many cases, TeamPoS 3000 control units will be fully configured from the factory or at configuration centers. Others will be configured during installation. This section shows how to access the control unit components to add or change configurations and installation of Team PoS 3000 peripherals. Accessing the TeamPoS 3000 internal components always requires the removal of the front panel.

5.1.1 Front Panel

Removing the front panel gives access to the motherboard, disk drives, CD/DVD drive and optional partial battery backup.

Caution: Be sure to observe all ESD precautions and power off procedures.

1.To remove the front panel, use your assigned key to unlock the front door. Next open

front door by pulling forward from the notch. .

D900000145 Issue 3 5-1