TeamPoS 3000 XL and XL2 | Maintenance |
This second diagram shows a Backplane Assembly with the Combo Board and a blanking plate installed beneath it. XL2 Motherboard DOES NOT SUPPORT the COM Board but DOES SUPPORT a single USB Board, or a single combo board.
Caution: Ports designated as Port C on the backplane (24V PUSB) and Port 3 on the Combo board (24V RS232) do not meet UL limited power source (LPS) requirements. These ports are limited to only allowing 24V Retail POS RS232 or powered USB peripherals that do not exceed a rated current of 4 Amps.
Peripherals intended to be connected via - Jacketed Cable for external use rated 30 V, max 3.05m long, marked
Note: When the Combo Board is installed, only one 24V port should be used for 24V printer. Port 3 and Port C cannot provide 24V power to 2 printers simultaneously.
Issue 3 | D900000145 |
