
TeamPoS 3000 XL and XL2 | Installation |
4.Thread the cables through the stand beginning with the larger cables first. Video cable (either DVI or VGA) and powered USB are required. Audio cable and
| Under the |
|
VGA Cable | bridge | Under the |
| ||
|
| base |
Powered USB |
| Through the |
Audio Cable |
| tunnel |
( |
| |
|
| |
DVI Cable |
|
|
DVI Cable Configuration | VGA Cable Configuration |
with optional Audio & | with optional Audio & |
DVI | USB Audio pUSB | VGA | USB Audio pUSB |
5.Use DVI or VGA, not both. Bend DVI (or VGA) 90° towards the outside of the bracket (before the bridge) and then 90° again towards the LCD mount. Powered USB, audio (optional), and
6.Rotate the monitor stand as needed so that you can reach the cables as they are threaded through the stand.
Under the base
Through the tunnel
|
| Under the |
| VGA | bridge |
| Powered USB |
|
| Audio Cable |
|
|
| |
| DVI Cable |
|
D900000145 | Issue 3 |