TeamPoS 3000 XL and XL2

Installation

5.11. Installing the I/O Boards

Caution: Be sure to observe all ESD precautions and power off procedures.

The following I/O board options are available on the TeamPoS 3000XL and XL2:

1.No I/O board.

2.Single Powered USB (one board with 3 powered USB ports).

3.Combo Board (The XL Combo Board has 6 powered USB ports, and 2 RS232 ports. On the XL2 there are only 5 active USB ports and 2 RS232 ports).

4.Combo Board with COM Board (Combo board in #3 plus COM Board with 3x RS232 ports). COM board cannot be used with the XL2 motherboard.

Note: The Combo board cannot be combined with single powered USB. The Combo board can be installed without the COM board on the TeamPoS 3000 only, but the COM board cannot be installed without the Combo board.

D900000145

Issue 3

5-24

Page 70
Image 70
Fujitsu 3000 XL manual Installing the I/O Boards