TeamPoS 3000 XL and XL2 | Installation |
5.14.2 Single Dispersed LCD Stand
Hinge Cap
Lower Hinge | Top Hinge | |
Cover | ||
Cover | ||
|
1.Remove only the hinge cap from the stand; leave the top and bottom hinge cover in place. Some photos in this section show the bottom hinge cover and top hinge cover removed in order to more clearly show the cable route; however, assembly is easier if the bottom hinge cover and top hinge cover are left in place.
2.Remove the cover plate on the bottom of stand by removing the 4 M3x 05 flathead, phillips 6mmcountersunk screws. Retain screws to reattach the cover plate after cables have been routed.
D900000145 | Issue 3 |
