TeamPoS 3000 XL and XL2 | Installation |
5.18.2 Installing the Central Filler
The Central Filler is used to occupy the free space on a standard control unit with a stacked LCD (either D22 or D25) and a model DT50III printer. The cable for the keyboard is threaded through the underside of the central filler and therefore the keyboard is installed at the same time as the Central Filler.
1.Install Central Filler by placing it on the chassis with the front edge aligned with the central lip and ½” to the left of the LCD (facing the front of the unit).
Central Filler | LCD Stand Installed on |
| |
| Standard TeamPoS 3000 |
| Slide Right |
| Notice keyboard not |
| seated, cable under the |
| Central Filler |
2.Slide Central Filler to the right so that the front and back of the Central Filler align with the front and back of the LCD.
D900000145 | Issue 3 |
