Fujitsu 3000 XL manual XL Motherboard Settings, JP5

TeamPoS 3000 XL and XL2 Maintenance

7.2.2 XL Motherboard Settings

Switch and jumper settings on the TP3000 XL motherboard
Setting Pin#		Function							Default Setting
		Video source selection of 1st display
JP1		1-2 – XL – DVI Interface							1-2
		2-3 – XT – Kiosk LVDS Interface
		VCCA voltage selection
JP5		1-2 – only - VCCA is 1.8V for PentiumM and CeleronM							1-2
		2-3 – Do not use. VCCA is 1.5V for future use.
J13		Beep sound enable							Short
		CMOS Clear
CLR_CMOS	1-2 -		CMOS Clear						2-3
	2-3 -		Normal Operation
		Panel selection for LVDS panel
		1	2	3		4		Panel	1	OFF
		OFF	OFF	OFF		－		12.1 inch SVGA
LCD_SW									2	OFF
		ON	OFF	OFF		－		15 inch XGA	3	OFF
		OFF	ON	OFF		－			4	OFF
		ON	ON	OFF		－
		Other	setting			－		Reserved
		Connector selection of			1st SATA		HDD		1…ON
SATA1		1	2	3		4		Panel	2…ON
		ON	ON	ON		ON		J4 XL	3…ON
		OFF	OFF	OFF		OFF		J11 XT (Kiosk)	4…ON
		Other	setting					Prohibited
		Connector selection of 2nd SATA HDD							1	ON
SATA2		1	2	3		4		Panel	2	ON
		ON	ON	ON		ON		J4 XL	3	ON
		OFF	OFF	OFF		OFF		J11 XT (KIOSK)	4	ON
		Other	setting					Prohibited

D900000145 Issue 3 7-9