TeamPoS 3000 XL and XL2 | Site Preparation |
system. The terminals must not be directly connected to a power system with impedance earthed neutral, i.e., an IT power system.
f. For pluggable equipment, the supply plug shall be connected as follows:
Black or Brown | Live (Hot) |
White or Blue | Neutral |
Green or Yellow | Ground/Earth |
To the User: |
|
•DO read the operating instructions carefully before you attempt to use this equipment.
•DO ensure that the supply connector or isolator is readily accessible to enable isolation of the equipment
•DO ensure that a competently trained person checks that all electrical connections (including the supply plug and any extension leads) are properly made in accordance with the instructions.
•DO NOT allow the supply cord to be positioned where it may be snagged,
•DO NOT continue to operate the equipment if you have ANY doubt about it working normally, or if it is damaged in any way. Instead, switch it off and, if the equipment is pluggable, remove the supply cord and contact your local service agent.
•DO NOT remove any fixed covers unless you are qualified / authorized to do so for the preparation of the equipment. There are no user serviceable parts under the covers unless expressly indicated in the equipment governing manual. Always remove the supply plug from the power source before removing any covers, and ensure ALL covers are replaced and correctly secured before re- connecting the supply plug.
•DO NOT obstruct any of the ventilation slots in the equipment. Obstruction of these slots can cause overheating, reduce equipment reliability and shorten the life of the equipment.
•DO NOT expose the equipment to spilled liquids
•DO NOT replace the supply cable with a different type than is called up in the instruction documentation or supplied with the equipment.
D900000145 | Issue 3 |
