Precor EFX LCD manual While you use a ¼-inch hex and ½-inch box

Cardio Theater Integrated Bracket Assembly Instructions
Important: Ask someone for help before
completing the next step.	5		6
5. Remove the four fasteners securing the upright
support.
Ask your assistant to hold the upper support			Upper
while you use a ¼-inch hex and ½-inch box
	Rubber		support
end wrench to remove the four fasteners that
	grommet
secure the upright support. Keep the fasteners
together and within easy reach.
Important: A data cable runs the length of the
upright support. Do not separate the upper
support from the lower support until you have				Data
disconnected the cable in the next step.
				cable
6. Disconnect the data cable.	Upright
Ask your assistant to gently lift the upper	support
support to expose a gap between the upper
and lower supports. Access the data cable and				Lower
disconnect it.	8		9	support
7. Lay the upper support and display console on
a clean work surface.
8. Separate the display console from its bracket.		Display
Remove the four screws from the back of the		console
display console bracket using a ⁵⁄₃₂-inch hex
key. Secure the display console so its weight
does not place excessive pressure on the data
cable.
9. Remove the plastic plug.
Use your thumbs to pop the plastic plug from
the display console bracket. Discard the plug.
			Display	Plastic
		Display	console	plug
			bracket
		console
		bracket

Preparing the EFX556i

page 15