Precor EFX LCD manual Dvd

Cardio Theater Integrated Bracket Assembly Instructions

6.Fully tighten the bottom two screws.

Use a Phillips-head screwdriver to fully tighten the bottom two screws. Leave the top two screws finger tight.

7.Connect the coaxial/power cable connectors to the LCD Screen.

Attach the connectors—coaxial, power, and DVD—to the back of the LCD Screen.

Note: If you do not have a DVD option, you can feed the DVD cable back into the pivot tube compartment so it is not hanging out.

8.Connect the controller cable.

Feed the controller cable through the front side of the pivot tube and attach it to the back of the LCD Screen.You will hear a definite click as the connector snaps into place inside its receptacle.

Note: For more information about cable connections, refer to the Cardio Theater LCD Screen manual.

Important: If you purchased the DVD Integrated Bracket Option, you will want to install that option before you continue to the next section. Refer to the DVD Integrated Bracket Option Guide for assembly instructions.

6

7
	Power
	connector
Coaxial	DVD
connector	connector

Note: If you do not have the DVD option, you can feed the DVD cable back into the pivot tube compartment so it is not hanging out.

8

Controller

cable

Attach the LCD Screen

page 23