Precor EFX LCD manual Preparations, RequiredTools

Cardio Theater Integrated Bracket Assembly Instructions

2 Preparations

Important: To attach the Cardio Theater Integrated Bracket, ask another adult for help. Do not attempt the assembly by yourself.

Remember to read and follow the instructions in this guide. If you do not assemble the Cardio Theater Integrated Bracket according to these guidelines, you could void the Precor Limited Warranty.

RequiredTools

Obtain these tools before assembly:

•Standard hex key set

•Standard socket set

•½-inch box wrench or crescent wrench

•Flat head screwdriver

•Phillips-head screwdriver

•Power drill with a ⁷⁄₈-inch drill bit

•Standard torque wrench

Installation Requirements

Review these installation requirements before assembly:

•The Cardio Theater Integrated Bracket is

built to VESA MIS-D, 100/75 standard interface specifications.

•Provide ample space around the EFX. Open space around the unit allows for easier access and installation.

•Open the box and assemble components in the sequence presented in this guide.

•Leave room for adjustments. Tighten fasteners (bolts, nuts, and screws) so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps to do so.

AssemblyTips

•Read all the notes on each page before com- pleting that step.

•While you may be able to assemble the Cardio Theater Integrated Bracket using the illustra- tions only, important safety notes and other tips are included in the text.

•Refer to the EFX owner’s manual for torque wrench specifications. The handrail clamp and upright support fasteners are not fully secure until tightened using a torque wrench.

The assembly of the Cardio Theater Integrated Bracket takes about ½ hour to complete.

Preparations

page 5