Cardio Theater Integrated Bracket Assembly Instructions
16.Pull the cable and its two connectors out of the lower support and base tube.
Note: Remember to leave about 3 feet
(1 meter) of cable hanging out of the hole in the display console bracket.
17.Secure the upright support by replacing the four fasteners set aside in step 5.
CAUTION:The next step requires the use of a drill and the safety considerations that go along with operating power tools. Protect the work surfaces.Take the necessary steps to avoid injury to yourself or damage to the surrounding area and equipment.
18.Drill a hole in the end cap.
Use the
19.Feed the cable and its two connectors through the hole in the end cap.
20.Replace the end cap in the base tube.
16
Lower support
Base tube
17
Rubber grommet
Read CAUTION above Step 18.
18 |
End cap |
19 |
20 |
Coaxial/power |
cable |
Upright support
End cap 
Preparing the EFX556i
page 18
