Cardio Theater Integrated Bracket Assembly Instructions
13.Secure the display console.
Replace two of the screws at the base of the display console bracket. Do not fully tighten the screws! Leave space between the screw heads and the display console bracket. The bracket assembly slides in between the two.
14.Reconnect the data cable.
Ask your assistant to hold the upper support above the lower support while you reconnect the data cable. Push the connection into the lower support tube.
15.Slide the coaxial/power cable with its two connectors through the lower support.
While your assistant holds the upper support, continue feeding the ends of the coaxial/power cable into the lower support. Slide the cable and its connectors so no excess remains at the gap between the upper and lower supports. Ask your assistant to lower the upper support and realign the mounting holes.
CAUTION: Be careful! A height adjuster screw protrudes inside the base tube. Cables can get caught and fingers scratched on the screw threads.
13 |
| |
| Display console | |
| 15 | |
| Upper support | |
Replace two |
| |
screws at base | Coaxial/power | |
of display | ||
cable | ||
console | ||
Display console | ||
bracket. | ||
| bracket | |
14 |
| |
Upper support |
| |
| Data cable | |
Coaxial/power | Data | |
cable | cable | |
| Lower | |
| support | |
| Lower | |
| support |
Preparing the EFX556i
page 17
