Precor P30 manual View of handlebar placement

Assembling the AMT 19

Note: When the handlebars are mounted correctly, each bends slightly outward.

Figure 4: View of handlebar placement

3.Attach the handlebars using four ⁵₁₆-inch x 1¾-inch hex head screws, eight ⁵₁₆-inch washers, and four ⁵₁₆-inch locknuts. Using a torque wrench, tighten the fasteners with 180 to 200 inch-pounds of torque.

Figure 5: Handlebar attachment

4.Rotate the plastic boot so that its tab aligns with the cutout below it, and then press the boot downward to secure it in place.