Precor P80 manual Upper body handlebar attachment detail

30Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815

2.To attach the upper body handlebars, place one split washer and one ⁵₁₆-inch washer on each of six socket-head cap screws, then insert three of the screws through each handlebar bracket. Fully tighten the fasteners using a ¼-inch hex key.

Figure 16: Upper body handlebar attachment detail

Important: In the following step, install the fasteners in the order presented. The bushing slides inside the link arm. The heads of the screws remain on the ramp side of the link arm.

3.Attach the handlebars to the link arms using two hex head screws, two bushings, and four ³₈-inch washers.

Note: For ease of installation, slide the corresponding foot pedal to the top of the ramp before attaching each handlebar.