Assembling the EFX | 23 |
6.Remove the tape at the top of the left upright support.
7.Feed one of the cables you want to install down through the upright support, then along the inside of the foot support and back through the central frame member. The following illustration shows the general path of the cable.
Figure 5: EFX cable path
8.Pull the end of the cable upward through the opening just behind the lift motor, as shown in the previous illustration.
9.Locate the tabbed end of the modular plug coupler. Snap this end of the coupler into the square opening in the jack panel.
10.Slide the
