Precor manual Install Seat and Rollers, S3.15 Assembly and Maintenance Guide

S3.15 Assembly and Maintenance Guide

3. Install Seat and Rollers

A.Attach the Seat Pad to the Seat Stem using four 1-inch zinc buttonhead bolts

two zinc flat washers

Wrench tighten using a 6mm hex key.

B.Insert the Seat Stem into the Seat Upright Assembly. Pull out the seat adjustment pin to insert the stem. Place the Seat Stem at its lowest position.

C.Attach the Back Pad to the Main Upright using two 2½-inch hex head bolts

two flat washers Wrench tighten.

Back

Pad

2 - 2½" bolts

2 - washers C

Seat Pad

4 - 1" zinc

A buttonhead bolts 2 - zinc washers

Seat Stem

Pull out the seat adjustment pin to B insert stem.

1

2

3

4

5

6

Step 3. Install Seat and Rollers

page 11