Precor manual Install Seat and Rollers, continued, S3.15 Assembly and Maintenance Guide

S3.15 Assembly and Maintenance Guide

D.Slide a Plastic Washer and a Roller Pad onto one end of a Roller Pad Rod. Insert one Mushroom Cap to plug the end hole. If necessary, pound the Mushroom Cap in place using the rubber mallet.

E.Insert the Roller Pad Rod through the hole in the Leg Extension Arm.

F.Slide the remaining Plastic Washer and Roller Pad on the other end of the Roller Pad Rod. Insert one Mushroom Cap to plug the end hole. If necessary, pound the Mushroom Cap in place using the rubber mallet.

G.Attach the Floor Plate using two ³⁄₄-inch buttonhead bolts Wrench tighten using a 6mm hex key.

			D
				Plastic Washer
					Roller Pad
			Roller
			Pad Rod
					Mushroom Cap
				F
		Floor			E
		Plate
	2 - ³⁄₄" buttonhead bolts
	G
1	2	3	4	5	6

Step 3. Install Seat and Rollers, continued

page 12