Preh MC15T5 manual Factory Reset + Yes No, Mechanical Adjustment of the LCD Position

- FACTORY RESET

Press the + button to restore Volume, OSD V-Position, OSD H-Position, V-Position, H- Position, Phase, Brightness, Clock to factory default.

Factory Reset

+Yes - No

3.4Mechanical Adjustment of the LCD Position

The LCD position on a VESA Mount Preh Touch / Screen Commander cannot be changed directly at the Product. The adjustment (tilting or swinging) of the Touch Screen Commander depends on the pole or wall mount hardware used.

The LCD of the Preh Touch / Screen Commander is swingable and tillable. According to the usage the LCD position can be changed.

The below picture shows the model with the multimedia base.

Pict. 8: adjusting screws on rear side

The infinitely variable adjustment of the tilting force can be made with two adjusting screws located on the rear of the monitor. The adjustment torque (1 - 8 Nm) should be about the same on both screws.

Pict. 9: adjusting screws below

The infinitely variable adjustment of the swinging force can be made with two adjusting screws in the base of the monitor. The adjustment torque (1 - 8 Nm) should be about the same on both screws.

13	subject to change without prior notice	05.2004
	Preh KeyTec GmbH, www.preh-keytec.com