PREMIER SX USER MANUAL, MAINTENANCE GUIDE & LOG BOOK
4.3SUMMARY OF LED COMBINATIONS AND THEIR MEANING Use the table below to determine the condition of the panel.
LEDs LIT | LED CONDITION | PANEL STATUS |
POWER | CONSTANTGREEN | The panel is supplied with power, and has no faults / fires (System Normal) |
|
|
|
GEN FLT | CONSTANTYELLOW | Problem with keyswitch connections |
ONLY |
|
|
|
|
|
GEN FLT & | CONSTANTYELLOW | There is a problem with either the mains supply or the battery backup |
SUPPLY FLT | FLASHINGYELLOW |
|
|
|
|
GEN FLT & | CONSTANTYELLOW | There is a wiring problem. One of the cables is touching the earth screen. |
EARTH FLT | FLASHINGYELLOW |
|
|
|
|
GEN FLT & | CONSTANTYELLOW | There is an open circuit fault in the wiring of the zone indicated. |
ZONAL FLT | FLASHINGYELLOW |
|
|
|
|
GEN FLT & | CONSTANTYELLOW | There is a short circuit fault in the wiring of the zone indicated. |
ZONAL FLT | FLASHINGYELLOW |
|
GEN S/C | FLASHINGYELLOW |
|
|
|
|
GEN FLT & | CONSTANTYELLOW | There is an open circuit fault in the wiring of one or both of the sounder |
SND FLT | FLASHINGYELLOW | circuits |
|
|
|
GEN FLT & | CONSTANTYELLOW | There is a short circuit fault in the wiring of one or both of the sounder |
SND FLT | FLASHINGYELLOW | circuits |
GEN S/C | FLASHINGYELLOW |
|
|
|
|
GEN FLT & | CONSTANTYELLOW | A processor fault has occurred. To reset, turn keyswitch on then back off. If |
SYSTEM FLT | CONSTANTYELLOW | problem persists, consult your dealer. |
|
|
|
GEN FIRE | CONSTANTRED | A manual evacuation has occurred. |
ONLY |
| The sounders will be active. |
|
|
|
GEN FIRE & | CONSTANTRED | A fire has occurred in the zone indicated. |
ZONE FIRE | CONSTANTRED | The sounders will be active. |
|
|
|
GEN FIRE & | CONSTANTRED | A fire has occurred in the zone indicated. |
ZONE FIRE & | CONSTANTRED | The sounders have a delay set, and will become active after the |
GEN DISABLE | CONSTANTYELLOW | programmed delay. To override the display, press delay override. |
& DEL | CONSTANTYELLOW |
|
|
|
|
GEN DISABLE | FLASHINGYELLOW | The panel is ready for selecting disable or test mode |
|
| |
|
|
|
GEN DISABLE | FLASHINGYELLOW | The panel is in SELECT DISABLEMENT MODE |
|
| |
|
|
|
GEN DISABLE | FLASHINGYELLOW | The user is scrolling through zones to select which one to disable/or user |
ZONEDISABLE | has just enabled the zone. | |
|
|
|
GEN DISABLE | CONSTANTYELLOW | The indicated zone is disabled. |
ZONEDISABLE | CONSTANTYELLOW |
|
|
|
|
GEN DISABLE | CONSTANTYELLOW | The Sounders are delayed by the amount set on the rotary switch. |
DEL | CONSTANTYELLOW |
|
|
|
|
GEN TEST | FLASHINGYELLOW | The indicated zone is in Test Mode. |
ZONEDISABLE | FLASHINGYELLOW |
|
|
| |
|
|
|
4.4 CHECKING THE PANELS INDICATION LEDS
Turn the key switch to “Controls Enabled” position then press the LED test button (Button 4). All the LEDs on the front panel will light, and the panel’s internal buzzer will also sound.
Approved Document No: | PAGE 6 | |
Issue: 1.3 Authorised: GH | Date: 9/6/2004 |
|
