Essential Notes on Acceptance and Installation of the Premier Heat Pumps (PHP) Water Heater and Chiller
1)Delivery: After removing the transport packaging please check the PHP Water Heater for any possible damage attributable to shipping. Any degradation related to transport should be advised within 48 hours.
2)Important: Please fully read the installation instructions prior to installation. Installation should only be carried out by suitably qualified electrician and/or authorised installer. These instructions should be retained for future reference.
3)Standards of Installation: The installation must be carried out in accordance with the applicable local safety and installation standards. The installation must be in accordance with the manufacturer’s installation instructions; a person qualified in the installation of Premier Heat Pump Hot Water Cylinders. Incorrect installation can cause injury to persons or damage to the unit. The supplier cannot be responsible for incorrect installation or any resulting damage or injury.
4)Intended Operation: This heat pump is intended to be used as a domestic hot water cylinder. Any other use or application will void the warranty.
5)Breakdown: In the unlikely event of failure, contact the installer. There are no operator serviceable parts and all repairs should be undertaken by a refrigeration engineer or other authorised technician.
6)Resale: In the event of resale to a third party, it is imperative that all manuals and warning and cautions be made available to the new owner.
Premier Heat Pumps – Water Heater and Chiller Manual | Page 2 |
