Hardware Setup
Power Supply
The mainboard supports ATX power supply for the power system. Be- fore inserting the power supply connector, always make sure that all compo- nents are installed properly to ensure that no damage will be caused.
ATX 20-Pin Power Connector: JPWR1
This connector allows you to connect to an ATX power supply. To connect to the ATX power supply, make sure the plugs of the power supply is inserted in the proper orientation and the pins are aligned. Then push down
the power supply firmly into the connector. The power connector supports instant power on function which means that system will boot up immediately
when the power supply connector is inserted on the board.
10
20
1
11
JPWR1
JPWR1 Pin Definition
PIN | SIGNAL | PIN | SIGNAL |
1 | 3.3V | 11 | 3.3V |
2 | 3.3V | 12 | |
3 | GND | 13 | GND |
4 | 5V | 14 | PS_ON |
5 | GND | 15 | GND |
6 | 5V | 16 | GND |
7 | GND | 17 | GND |
8 | PW_OK | 18 | |
9 | 5V_SB | 19 | 5V |
10 | 12V | 20 | 5V |
|
|
|
|
